|
|
Series 2100
Schools/Banks/Auditoriums/Offices
Our Series
2100 is great for use in restaurants, offices, churches, auditoriums and
other commercial facilities where some degree of sound reduction is
desired. The full perimeter seal used on the 2100 Series partition
also provides an effective method to minimize heat loss or transfer of
air from one room area to another. This single wall acoustic
partition requires minimal stack space and allows easy reconfiguration
of the facility. See Jobs Album for more
pictures of doors.
All door slats are
solid 1/4" MDF (medium density fiberboard) wood 4 1/2" wide
and can take fourteen
vinyl faces to choose from, and four real wood veneers. We can
also add custom vinyl if you have a manufacturers number and name for
the vinyl face you prefer. We
can also apply company logos too.
Shipped
complete (shipping included in 48 states) with track and instructions and two types of fasteners, the
average homeowner with an electric screw gun will have these up in a
half hour or so. OR; have your contractor call us.
|
Determine Height and
length
How
to Measure
Height determines price
per linear* foot
Linear foot price shown below.
* Linear - measurement in
length, feet and inches
|
How
to Measure - We
calculate total door price first on HEIGHT, then the WIDTH to the closest whole foot.
IF your opening is 10 feet 2
inches we calculate
at eleven feet times the price shown. If you can build the door
jamb in
with ease to reduce
the overall width to a whole number of feet, your better off price wise.
The door will be
made to fit your opening, DO NOT FUDGE, OR GUESS, THE MEASUREMENT.
Prices
2100V Series
Vinyl Laminates - Birch, Natural Oak, Light Oak,
Dark Oak, Pecan, Teak, Mahogany, Walnut, White, Tan, Chalk, Tahiti, Rattan, Amethyst
Vinyl and Veneers Page |
Prices
2100H Series
Real Wood Veneers - Birch, Oak, Walnut, Mahogany
Priced Per Linear Width Foot No Options added yet
Vinyl
and Veneers Page |
Basic Vertical Size |
Vinyl
Covered Door Price
Per Width Feet |
Birch
Vinyl/Veneer Chart |
Oak
Vinyl/Veneer Chart |
Walnut
or
Cherry
Vinyl/Veneer Chart |
Mahogany
or
Maple
Vinyl/Veneer Chart |
Up to 8 ' 1"
(up to 97" tall) |
$211.00 |
$316.00 |
$320.00 |
$387.00 |
$355.00 |
8'
2" to 10' 1"
(98" to 121" tall) |
$255.00 |
$395.00 |
$382.00 |
$471.00 |
$452.00 |
10'
2" to 12' 1"
(122" to 145" tall) |
$330.00 |
NA |
NA |
NA |
NA |
Other
Info here, ship weights, options for coverings and so on.
-
Sound Control: FSTC
21 This is a very subjective number. Hung in a room with
no rugs, curtains, or acoustic ceiling it's ability to stop echoed
sound will be poor, while a room with sound quality absorbing accoutrements
will aid the process of controlling sound, as opposed to amplifying
it. Read this document please: http://www.accordiondoors.net/images/FDSoundControlInfo.pdf)
-
Track: 2"
x 1 1/8" w/acoustic seal, color match molding. Wood sweep
molding 8" wide.
-
Panels: Vinyl-lam
of natural wood veneer 4.25"w x .25" thick
-
Wheels: Dual
nylon wheel on steel axle
-
Latch: Thumbturn
two-sides w/deadlatch. Key locks one side or two sides
available..
-
Width: Any
width
-
Height: to 12'
1" for vinyl and 10' 1" for hardwood veneers.
-
Stacking when
folded: 1.25" per linear foot plus lead post, 2.75"
-
Door weights and
other shipping data
|
|
Options for the 2100
|
-
Custom sizes: No
Charge
-
Acrylic Inserts
-15" x 2" clear or bronze tint $25.00 specify how many and
what panels.
-
Made as pairs (two
doors meet in middle): $40.00
-
Custom Finish:
15%, $100 minimum, not including custom ordered vinyl.
-
Key Lock one side:
$30.00 Weiser
-
Key Lock two
sides: $60.00 Weiser
-
Non-locking foot
bolt: $36.00
-
Double end lead
post: $72.00
-
Pull rod: $30.00
-
Intermediate
rolling post: $60.00
-
Fire retardency
adds 40% to price: flame spread 15, fuel contributed 0, smoke developed 25.
This feature is available in light oak and chalk vinyl-lam only.
-
Sliding Jam Panel
: $100 (You build pocket for door to disappear in, to our Specs,
we will supply door as sliding jam unit. See tech docs.)
Use
with Suspended Ceiling - In order to adapt this door and it's
special track and 5" wide molding set up; the header, which
must be 4" wide in order to mount track AND molding, should be
brought to exact level of suspended ceiling grid, the molding will
extend beyond header 1/2" both sides, permitting suspended
ceiling tiles to nest on it. The decorative molding will be
seen. See the Model
2100 technical drawings page for shop drawings of standard mounting.
|
|
|
|